Coding Chase

A while as passed since my last post on the blog - work, family and life in general have rolled by and although I haven't stopped experi...

SailfishOS - True Independent Mobile OS A couple of years back, I had the chance to try out the Jolla Phone running SailfishOS and even ...

So, after having an ESP8266-01 control my CTC-3D printer LED lighting and Fan cooling, I decided to improve the solution further. Moving m...

I've been rather busy lately but thought I'd document a few relevant pointers regarding 3D printing in general and my CTC-3D printer...

Based on the previous blog posts on MQTT, ESP8266-01 and NodeMCU, I decided as mentioned before to upgrade my newly acquired 3D printer, a C...

Now all this is left is to program the ESP8266-01 module...! For this part, I used one of these: FT232RL 3.3V 5V FTDI USB to TTL Ser...

My apologies in advance if the diagram below isn't all that proper, as mentioned before, I'm a bit of a newbie when it comes to wiri...